Mechanisms of executive electric propulsion type MEP are designed to move the regulating bodies of reciprocating motion in systems of remote or automatic control. A typical example of use is the use with shut-off or shut-off valves, including cases where close closure is required in the end position. The mechanism, as a rule, is mounted directly on the regulating arm in any spatial position.
The operating mode of the mechanism is re-short-term with frequent start-ups S4 in accordance with GOST 183 with an inclusions frequency of up to 320 per hour (maximum incidence of up to 630 per hour, but not more than 1 hour per day) by up to 25% with loads on the output rod within From the nominal counter-acting up to 0.5 nominal attendant.
In the mechanism, one of the following types of position signaling unit can be installed:
- The current position signaling unit BSPT-10 or BSPT-21
- Inductive signaling unit BSPI-10
- Block of signaling of position rheostatny BSPR-10
- Block of limit switches BKV
|
Symbol |
Nom. Effort, H |
Voltage and frequency of power supply |
Power consumption, W |
Overall dimensions, mm |
Weight, kg |
| MEP 2500/63-10 |
2500 |
220В 50Hz |
45 |
270x208x470 |
13,5 |
| MEP 2500/63-16 | |||||
| MEP 2500/63-25 |
110 |
||||
| MEP 2500/63-40 | |||||
| MEP 6300/75-25 |
6300 |
||||
| MEP 6300/125-40 | |||||
| MEP 6300/63-25 |
380В 50Hz |
300x208x540 |
15 |
||
| MEP 6300/63-63 |
300x208x644 |
16,5 |
|||
| MEP 2500/30-63 |
2500 |
220В 50Hz |
270 |
370x300x455 |
22 |
| MEP 10000/63-63 |
10000 |
220В 50Hz |
110 |
260x205x540 |
20 |
| MEP 16000/63-32 |
16000 |
||||
| MEP 16000/100-63 | |||||
| MEP 16000/40-16 | |||||
| MEP 20000/63-32 |
20000 |
||||
| MEP 20000/120-63 | |||||
| MEP 20000/160-63 | |||||
| MEP 20000/120-63 |
20000 |
380В 50Hz |
270 |
260x205x540 |
28 |
| MEP 16000/63-32 |
16000 |
||||
| MEP 20000/63-32 |
20000 |
||||
| MEP 20000/160-63 | |||||
| MEP 16000/100-63 |
16000 |
||||
| MEP 10000/63-63 |
10000 |
||||
| MEP 16000/40-16 |
16000 |
||||
| MEP 20000/63-63 |
20000 |
305 |
30 |
||
| MEP 25000/10-100 |
25000 |
380В 50Hz |
550 |
430x330x680 |
90 |
| MEP 25000/16-160 |
430x330x740 |
95 |
|||
| MEP 25000/25-250 |
430x330x830 |
100 |
|||
| MEP 25000/25-100 |
430x330x680 |
90 |
|||
| MEP 25000/40-160 |
430x330x740 |
95 |
|||
| MEP 25000/63-250 |
430x330x830 |
100 |
|||
| MEP 25000/63-100 |
285 |
430x330x680 |
90 |
||
| MEP 25000/100-160 |
430x330x740 |
95 |
|||
| MEP 25000/160-250 |
430x330x830 |
100 |
|||
| MEP 40000/63-100 |
40000 |
550 |
430x330x680 |
90 |
|
| MEP 40000/100-160 |
430x330x740 |
95 |
|||
| MEP 40000/160-250 |
430x330x830 |
100 |
|||
| MEP 63000/25-100 |
63000 |
430x330x680 |
90 |
||
| MEP 63000/40-160 |
430x330x740 |
95 |
|||
| MEP 63000/63-250 |
430x330x830 |
100 |
Climatic performance in accordance with GOST 15150:
- У2 (ambient air temperature from minus 30 to plus 50 ºС, relative humidity of ambient air up to 95% at temperature plus 35 ºС and lower temperatures without condensation of moisture);
- T2 (ambient air temperature from minus 10 to plus 50 ° C, relative humidity of the ambient air of 100% at a temperature of plus 35 ° C with condensation of moisture).
Degree of protection in accordance with GOST 14254-96: IP54 (shell type 2) ensures the operation of the mechanism in the presence of dust and water in the environment.
Electromagnetic actuating actuators MEP (explosion-proof version)
Mechanisms of MEP explosion-proof design are designed for operation in indoor and outdoor installations under a canopy in which explosive mixtures with explosive category IIB of group T4 can be formed, taking into account the requirements of Chapter 7.3 of the Electrical Installation Rules and other normative and technical documents determining the applicability of electrical equipment in explosive areas.
|
Symbol |
Nom. Effort, H |
Voltage and frequency of power supply |
Power consumption, W |
Overall dimensions, mm |
Weight, kg |
| MEP 2500/63-160-IIBT4 |
2500 |
380В 50Hz |
100 |
320x385x660 |
50 |
| MEP 2500/25-63-IIBT4 |
320x385x550 |
47 |
|||
| MEP 6300/160-160-IIBT4 |
6300 |
320x385x660 |
50 |
||
| MEP 6300/63-63-IIBT4 |
320x385x550 |
47 |
|||
| MEP 6300/10-63-IIBT4 |
52 |
||||
| MEP 6300/5-25-IIBT4 | |||||
| MEP 6300/63-160-IIBT4 |
345 |
320x385x660 |
|||
| MEP 2500/63-40-IIBT4 |
2500 |
100 |
270x250x440 |
15 |
|
| MEP 6300/63-63-IIBT4 |
6300 |
210 |
270x250x500 |
16 |
|
| MEP 6300/63-25-IIBT4 |
100 |
270x250x460 |
15 |
||
| MEP 6300/125-25-IIBT4 | |||||
| MEP 6300/125-40-IIBT4 | |||||
| MEP 25000/10-100-IIBT4 |
25000 |
545 |
430x350x680 |
95 |
|
| MEP 25000/16-160-IIBT4 |
430x350x740 |
97 |
|||
| MEP 25000/25-250-IIBT4 |
430x350x800 |
100 |
|||
| MEP 25000/25-100-IIBT4 |
430x350x680 |
95 |
|||
| MEP 25000/40-160-IIBT4 |
430x350x740 |
97 |
|||
| MEP 25000/63-250-IIBT4 |
370 |
430x350x680 |
95 |
||
| MEP 25000/100-160-IIBT4 |
430x350x740 |
97 |
|||
| MEP 25000/160-250-IIBT4 |
430x350x800 |
100 |
|||
| MEP 40000/63-100-IIBT4 |
40000 |
545 |
430x350x680 |
95 |
|
| MEP 40000/100-160-IIBT4 |
430x350x740 |
97 |
|||
| MEP 40000/160-250-IIBT4 |
430x350x800 |
100 |
|||
| MEP 63000/25-100-IIBT4 |
63000 |
430x350x680 |
95 |
||
| MEP 63000/40-160-IIBT4 |
430x350x740 |
97 |
|||
| MEP 63000/63-250-IIBT4 |
430x350x800 |
100 |
In terms of resistance to the effects of climatic factors of the external environment, the MEP mechanisms of explosion-proof design correspond to the climatic performance and the category of UHL2 placement in accordance with GOST 15150-69 with temperature limitations.
In terms of protection from getting into the mechanism of solids (dust) and water penetration, the mechanism and the remote unit have the degree of protection IP54, shells of category 2 in accordance with GOST 14254-96.
Mechanisms executive electric multiple-roll MEM (general industrial execution)
The electric multi-turn actuators type MEM are designed to move the regulating bodies in remote or automatic control systems.
The operating mode of the mechanism is re-short-term with frequent start-ups S4 in accordance with GOST 183 with an inclusions frequency of up to 320 per hour (maximum incidence of up to 630 per hour, but not more than 1 hour per day) by up to 25% with loads on the output rod within From the nominal counter-acting up to 0.5 nominal attendant.
In the mechanism, one of the following types of position signaling unit can be installed:
- The current position signaling unit BSPT-10 or BSPT-21
- Inductive signaling unit BSPI-10 or BSPI-21
- The signaling unit of the rheostat state BSPR-10 or BSPR-21
- Switch block BV
|
Symbol |
Nom. Effort, H |
Voltage and frequency of power supply |
Power consumption, W |
Overall dimensions, mm |
Weight, kg |
| MEM 16/63-10 |
16 |
380В 50Hz |
210 |
250x164x330 |
14 |
| MEM 16/160-25 | |||||
| MEM 16/400-63 | |||||
| MEM 40/63-10 |
40 |
125 |
300x230x350 |
22 |
|
| MEM 40/160-25 | |||||
| MEM 40/400-63 | |||||
| MEM 40/25-10 |
200 |
23 |
|||
| MEM 40/63-25 | |||||
| MEM 40/160-63 | |||||
| MEM 100/63-10 |
100 |
||||
| MEM 100/160-25 | |||||
| MEM 100/400-63 | |||||
| MEM 100/25-10 |
545 |
25 |
|||
| MEM 100/63-25 | |||||
| MEM 100/160-63 | |||||
| MEM 100/250-250 |
1045 |
365x230x365 |
32 |
||
| MEM 250/160-25 |
250 |
545 |
350x230x350 |
23 |
|
| ЭМ 250/240-200 |
1900 |
520x445x470 |
48 |
||
| MEM 100/63-10 |
100 |
24В |
240 |
390x230x350 |
28 |
Mechanisms electric executive multi-plan MEM (explosion-proof design)
The electric multi-turn actuators type MEM are designed to move the regulating bodies in remote or automatic control systems.
Mechanisms of MEM explosion-proof design are designed for operation in indoor and outdoor installations under a canopy in which explosive mixtures with explosive category IIB group T4 can be formed, taking into account the requirements of Chapter 7.3 of the Electrical Installation Rules and other normative and technical documents determining the applicability of electrical equipment in hazardous areas.
|
Symbol |
Nom. Effort, H |
Voltage and frequency of power supply |
Power consumption, W |
Overall dimensions, mm |
Weight, kg |
| MEM 16/63-10-IIBT4 |
16 |
380В 50Hz |
200 |
265x250x350 |
20 |
| MEM 16/160-25-IIBT4 | |||||
| MEM 16/400-63-IIBT4 | |||||
| MEM 40/1000-63-IIBT4 |
40 |
280 |
265x260x400 |
25 |
|
| MEM 100/160-10-IIBT4 |
100 |
430 |
265x260x400 |
25 |
|
| MEM 100/25-10-IIBT4 |
580 |
370x360x390 |
30 |
||
| MEM 100/63-25-IIBT4 | |||||
| MEM 100/160-63-IIBT4 | |||||
| MEM 100/160-4-IIBT4 |
430 |
440x320x335 |
37 |
In the mechanisms of the electric multi-turn actuators MEM of the explosion-proof design, the remote power supply BP-26 installed in the explosion-proof zone is provided for supplying the output position sensor of the output unit (sensor unit BD-26 of the signaling unit BSPT-26).
In terms of its resistance to the effects of climatic factors of the external environment, the mechanism corresponds to the climatic performance of the UHL placement category 2 in accordance with GOST 15150-69, but for operation at temperatures from minus 50 ºС to plus 50 ºС and 95% relative humidity at 35 ºС and lower temperatures without condensation Of moisture. In terms of protection from the ingress of solid bodies (dust) and water into the mechanism, the mechanism and the remote unit have the degree of protection IP54, shells of category 2 in accordance with GOST 14254-96.