(8352) 242-601 prom_pribor@mail.ru

Газовое оборудование

Article designation

Product name

Appointment

БУК-А1 Boiler control unit To control the boiler KV-GM with a capacity of up to 30 Gcal / h (automatic start-up, shutdown, protection, signaling, used in conjunction with BR10-1 /
The unit is certified.
БУК-А2 Boiler control unit To control the boiler DE with a capacity of up to 25 t / h steam (automatic start, stop, protection, signaling. It is used in conjunction with BR10-0).
The unit is certified.
БУК10 Boiler control unit Automation of start-up of shutdown, protection and signaling of solid fuel boilers KV-R, KV-TS, KE, DKVR.
БР10-0 Control unit PID, PI, P-regulation of the main 4 parameters of steam boilers
БР10-1 Control unit PID, PI, P-regulation of the main 3 parameters of hot-water boilers
БК10-0,
*-1,-4
Block cross Transition terminal blocks for connecting external circuits KSU10
* — under the clamp
БК10-2,
*-3
Block cross Transition terminal blocks for connecting external circuits KSU10
* for clamp, 3 channels for connection of TCM thermocouples to BR10
КСУ10-1,
*-1
Set of controls Automation of steam solid fuel boilers KE, DKVR. Contains BUK10, BR10-0, BK10-0 (BK10-1)
КСУ10-2,
*-3
Set of controls Automation of hot water solid fuel boilers KV-R, KV-T. Soderzhit BUK10, BR10-1, BK10-2 (BK10-3)
ЩА-КВР Shield automatics Automation of solid fuel boilers КВ-Р, КВ-ТССодержит БУК10, БР10-1 recording devices, starters for management of MEO, etc.
ЩС1-КВР Shield power Switching of power circuits of low-power drives of solid fuel boilers KV-R, KV-TS
ЩС2-КВР Shield power Switching of the power circuits of the smoke exhaust fan and the blower of the solid-fuel boilers KV-R, KV-TS.
СА-КВР Automation system For solid fuel boilers КВ-Р, КВ-РВ, КВ-ТС, КВ-ТСВ. Contains shields SHA-CWR, SCH1-CWR, SCH2-CWR, sensors, MEO mechanisms, local control devices
ЩА-КЕ Shield automatics Automation of solid fuel boilers KE, DKVR. Contains BUK10, BR10-0, recording instruments, starters for controlling the MEO, etc.
ЩС1-КЕ Shield power Switching of power circuits of low-power drives of solid fuel boilers KE, DKVR
ЩС2-КЕ Shield power Switching of power circuits of low-power drives of solid fuel boilers KE, DKVR
СА-КЕ Automation system For solid fuel boilers KE, DKVR. It contains shields SHCHA-KE, SCHS1-KE, SCHS2-KE, sensors mechanisms MEO, local control devices
БСА Comparison block analog Signaling of the threshold values of the difference between analog signals

Device type

Name and main characteristics

Электрозапальник газовый ЭЗ The ignition coil EZ is designed for automatic and remote firing of burners operating on gaseous and liquid fuels.

Read more …

Клапан для манометра Ру 1,6 МПа

ТУ 3742-004-20652433-98
Сертификат соответствия № РОСС RU.АЯ04.В00154

The valve for the manometer PN 1.6 MPa is designed for installation as a shut-off device on natural gas pipelines in front of instrumentation.

Read more …

Клапаны отсечные быстродействующие

ТУ 3742-002-20652433-93
Сертификат соответствия №РОСС RU.АЯ04.В00490

Shutoff valves are designed to work as a shut-off device on the gas supply line to the burners of steam and hot water boilers and carry out technological protections, automated remote control of the gas supply to the boiler heaters.

Read more …

Клапаны отсечные быстродействующие РУ 1,2 МПа

ТУ 3742-005-20652433-98
Сертификат соответствия №РОСС RU.АЯ04.В00154

High-speed cut-off valves are designed to work as a shut-off device on the gas supply line to steam and hot water boilers. Valves perform technological, remote and manual control of gas supply to boilers.

Read more …

Заслонки дроссельные

ТУ 3742-006-20652433-98
Сертификат соответствия №РОСС RU.АЯ04.В00155

The dampers are the executive body of the automatic control system for gas-using units and are installed directly on the gas pipeline. The dampers are designed to regulate the flow or pressure of gas in gas supply systems for thermal power plants (TPPs) and boiler houses.

Read more …

Блок гальванического разделения и преобразования унифицированных сигналов БРП For the introduction of galvanic separation into the unified signal circuit, as well as transformation of its scale and type. The input / output signal is 0-5, 0-20, 4-20 mA or 0-10 V (depending on the order). The basic permissible error is ± 0.25%. Electrical insulation strength «input-output» 500 V. Weight 0.7 kg. Powered by a 24 V DC source. Power consumption 3 W. Dimensions 40 × 162 × 170 mm.
Измерительный преобразователь потенциала катодной защиты ИП-ПК

Внесен в Госреестр средств измерений РФ под № 15664-01

To convert the cathodic protection potential of underground structures into a unified output signal. Used in systems of electrochemical protection of underground structures against corrosion of metal. The input signal is from 0 to minus 4 V. The input resistance is 1 MΩ. The output signal is 0-5, 0-20, 4-20 mA or 0-10 V (depending on the order). Accuracy class 0,5. Weight 2 kg. Power supply 220 V, 50 Hz. Power consumption 6.5 VA. Dimensions 80 × 162 × 170 mm.
Механизмы сигнализации положения МСП4-40, МСП4-330 To provide a unified DC signal (0-5, 4-20 mA) proportional to the position of the cut-off valve (MSP4-40) or servo motor (MSP4-330). Made by single-channel or three-channel. The input signal is 0-40 mm (MSP4-40), 0-330 mm (MSP4-330). The basic error is ± 1.0%. Power supply 220 V 50 (60) Hz. Power consumption 8 VA per channel. They are used in the regulation and control systems of the turbo units of nuclear power plants.
Механизм сигнализации положения МСП-94 For blocking in extreme positions and signaling about intermediate positions of the working body of process equipment or fittings. There are two versions: MSP-94U, MSP-94K. Input signal: 0-0, 63; 0-8; 0-44; 0-240; 0-720 turns of the input shaft. Output signal: MSP-94U — 0-5, 0-20, 4-20 mA and the state of contacts of 4 microswitches; MSP-94K — the state of contacts of 4 microswitches. Weight 4 kg. Power supply of MSP-94U — 220 (240) V, 50 Hz; 220 V, 60 Hz; power consumption 9 VA. Dimensions 124 × 225 × 176 mm. Possible use in nuclear power plants.
Механизм сигнализации положения МСП-94М For signaling the position of the regulating bodies of process equipment and fittings. It has designs that differ in the presence or absence of a rheostatic sensor and the switching capacity of microswitches. Input signal: 0-8; 0-44; 0-240; 0-720 turns of the input shaft. The output signal of the ICP-94MR is the change in the resistance of the potentiometer from 0 to 1 kΩ and the change in the state of the contacts of the 4 microswitches; МСП-94М — change of a condition of contacts of 4 microswitches. Weight 1.6 kg. Dimensions are 220 × 121.5 × 117 mm.
Индикатор сигнализирующий цифровой ИСЦ For digital indication of the value of the input signal in engineering units and the generation of discrete signals when the input signal reaches the setpoints of the upper or lower value. The input signal is 0-5, 0-20 mA. The output signal is the state of two «dry» switching contacts with a load capacity of 100 mA, 220 V, 50 Hz. Weight 0.6 kg. Power supply 220 V, 50 Hz. Power consumption 4 VA. Dimensions 40 × 80 × 190 mm.
Индикатор сигнализирующий цифровой температурный ИСЦ-Т To control the temperature in ° C and generate discrete signals when the temperature setpoint is reached at the setpoints of the upper or lower value. Types of temperature sensors — ТСМ, ТСП, ТХА, ТХК. The output signal is the state of two «dry» switching contacts with a load capacity of 100 mA, 220 V, 50 Hz. Weight 0.6 kg. Power supply 220 V, 50 Hz. Power consumption 4 VA. Dimensions 40 × 80 × 190 mm.
Индикатор двухканальный сигнализирующий цифровой ИСЦ-2 For digital indication of the values of two input signals in engineering units and the formation of discrete signals when the input signals of the specified settings of the upper or lower values. The number of inputs is 2. The input signal is 0 — 5, 0 — 20 mA. Output signals are the states of four «dry» switching contacts with a load capacity of 100 mA, 220 V, 50 Hz. Power supply 220 V, 50 Hz. Weight 2,5 kg. Power consumption 15 VA. Dimensions 80 × 160 × 250 mm.
Индикатор-сигнализатор температуры многоканальный ИСТ-12 To control the temperature at 12 specified points of thermal power plants. Provides warning alarm when the setpoints are exceeded by controlled temperatures. Main functions: conversion of temperature sensor signals (TXA, TCA, TCM, TSP); digital indication of the current temperature in ° C in the cyclic mode and on the call of the operator; digital indication of temperature limits set individually for each channel; the formation of a warning signal when the temperature limit measured by the parameter is exceeded on the channel under test; light indication of the number of the channel being polled; light indication of the channel number that triggered the alarm. Weight 2,5 kg. Power supply 220 V, 50 Hz. Power consumption 8 VA. Dimensions 80 × 160 × 270 mm.

Equipment for the automation of boilers and other heat installations

Device type

Name and main characteristics

Комплект средств управления КСУ10 For the automation of solid fuel steam (KE, DKVR) and water-heating (KV-R, KV-RV, KV-TS, KV-TSV) boilers equipped with chimneys with chain grill. Replaces the previously released kit 1KSU-T. It consists of three wall blocks interconnected by flexible detachable connections: the boiler control unit BUK10, the control unit BR10 and the block of the cross BK10. At the request of the customer is complemented by sensors, actuators, instrumentation panels and power switching equipment.
Блок управления котлом БУК10 For the automation of solid fuel steam (KE, DKVR) and water-heating (KV-R, KV-RV, KV-TS, KV-TSV) boilers equipped with chimneys with chain grill. Provides remote start and stop of the boiler (including a scraper) with blocking of operator’s wrong actions, emergency, warning and operational alarms, automatic emergency protection with memorization of the cause of the shutdown and blocking of the start. By the request of the customer is supplemented by sensors. Weight 9 kg. Power supply 220 V, 50 Hz. Power consumption 25 VA. Dimensions 300 × 415 × 170 mm.
Блок регулирования БР10 To automate the boilers and to ensure automatic regulation of the boiler’s performance according to the PI-law, the flow of blast air, the rarefaction in the furnace, the water level in the drum (for the steam boiler). At the request of the customer is complemented by sensors, electric executive mechanisms and contactless starters to control them. Weight 10 kg. Power supply 220 V, 50 Hz. Power consumption 100 VA. Dimensions 300 × 415 × 170 mm.
Блок управления котлом БУК-А1

Изделие сертифицировано

For automation of hot-water gas-oil boilers KV-GM heat output up to 30 Gcal / h. Performed functions: automatic («from the button») start and stop of the boiler, emergency protection, emergency and warning light and sound and working light signaling. Works together with the control unit BR10. At the request of the customer is complemented by sensors, actuators, regulating and recording instruments and local control devices. Weight 7 kg. Power supply 220 V, 50 Hz. Power consumption 25 VA. Dimensions 280 × 380 × 140 mm.
Блок управления котлом БУК-А2

Изделие сертифицировано

For automation of steam gas-oil boilers DE. Performed functions: automatic («from the button») start and stop of the boiler, emergency protection, emergency and warning light and sound and working light signaling. Works together with the control unit BR10. At the request of the customer is complemented by sensors, actuators, regulating and recording instruments and local control devices. Weight 7 kg. Power supply 220 V, 50 Hz. Power consumption 25 VA. Dimensions 280 × 380 × 140 mm.
Блок управления и сигнализации БУС12

Изделие сертифицировано

For the automation of a gas-fueled heat installation. The unit is aimed at small-capacity hot water boilers (up to 3 MW), burners for baking ovens, kilns, and drying chambers, vitamin flour production units, burner burners for large industrial installations. Provides replacement of control units from AMCO (BURS-1), KSU1, KSUM1 (BUS6), KSU7 (BUK7). At the request of the customer is completed with independent flame control units, sensors and actuators. Weight 7 kg. Power supply 220 V, 50 Hz. Power consumption 25 VA. Dimensions 295 × 420 × 170 mm.
Блок управления и сигнализации БУС14

Изделие сертифицировано

For automatic control of a heat installation operating on gaseous fuels. The unit is oriented to steam and hot water boilers of low power (up to 3 MW). Provides replacement of control units from AMK-U, KSU2P (BUS), KSUM2P, KSU8 (BUK8), KSU9 (BUK9), BUS12. At the request of the customer is completed with independent flame control units, sensors and actuators. Weight 7 kg. Power supply 220 V, 50 Hz. Power consumption 25 VA. Dimensions 295 × 420 × 170 mm.
Блок управления и сигнализации БУС15

Изделие сертифицировано

For the automation of a gas-fueled heat installation. The unit is oriented to steam and hot water boilers of low power (up to 3 MW), burners of baking ovens, kilns, and drying chambers, aggregates for the preparation of vitamin flour, a burner ignition device for large industrial installations. At the request of the customer is completed with independent flame control units, sensors and actuators. Weight 5 kg. Power supply 220 V, 50 Hz. Power consumption 25 VA. Dimensions are 260 × 360 × 100 mm.
Блок запального устройства БЗУ2 To form the control pulses of the automobile ignition coil in the schemes of ignition of the gaseous fuel of the thermal installation. At the request of the customer is completed with an ignition coil. Weight 1,0 kg. Power supply 220 V, 50 Hz. Power consumption 6 VA. Dimensions 150 × 70 × 100 mm.
Блок контроля пламени БКП-КЭ

Изделие сертифицировано

To convert the signals of the ionization sensor to a discrete signal used in emergency protection circuits of a gas-using installation when the flame of the burner device goes out. At the request of the customer is completed with a sensor — a control electrode of KE from nichrome. The input signal is a signal from the flame CE about the presence or absence of a detecting flame. The output signal is the state of the closing contact of the relay with a switching capacity of up to 2.0 A at a voltage of 250 V. Weight 1.0 kg. Power supply 220 V, 50 Hz. Power consumption 6 VA. Dimensions 150-70-100 mm.
Блок контроля пламени БКП-ФД

Изделие сертифицировано

For converting the signals of the photoelectric sensor into a discrete signal used in emergency protection circuits of a heat installation operating on gas or liquid fuel, when the flame of the burner device goes out. At the request of the customer is equipped with a photoelectric sensor FD. The input signal is a signal from the photosensor about the presence or absence of pulsations in the intensity of the radiation from the visible light of the flame with a frequency of 5 to 40 Hz. The output signal is the state of the closing contact of the relay with a switching capacity of up to 2.0 A at a voltage of 250 V. Weight 1.0 kg. Power supply 220 V, 50 Hz. Power consumption 6 VA. Dimensions 150 × 70 × 100 mm.
Блок контроля температуры БКТ To convert the temperature sensor signal of TCM type into discrete signals used in the emergency protection circuits of hot water boilers and for position control of the water temperature at their output. At the request of the customer is equipped with a sensor and a block of digital indication of the current temperature value. The input signal is a signal from the TCM. Output signals — the status of isolated relay contacts with a switching capacity of up to 2.0 A at a voltage of 250 V. Weight 1.0 kg. Power supply 220 V, 50 Hz. Power consumption 6 VA. Dimensions 150 × 70 × 100 mm.
Блок контроля уровня БКУ To convert water level sensors signals into discrete signals used in emergency protection circuits and water level control in various units. Input signals — the presence or absence of electrical conductivity between the level sensor electrode and the metal housing of the gauge vessel when touching or not touching the surface of the water, respectively. Output signals — the status of relay contacts with a switching capacity of 0.2 A at a voltage of up to 30 V. Power level sensors 20-30 V, 50 Hz. Power supply unit 220 V, 50 Hz. Weight 1,0 kg. The power consumed by the unit is 6 VA. Dimensions 150 × 70 × 100 mm.
Система автоматизации СА-КВР For the automation of hot-water solid fuel boilers KV-R, KV-RV KV-TS, KV-TSV, equipped with a furnace with a chain grate and scraper installation. The structure of the system includes an automation board SHCH-KVR, power boards SHS1-KVR and ShS2-KVR, a full set of sensors and local devices for monitoring the technological parameters of the boiler and actuators.
Щит автоматики ЩА-КВР For automation of hot water solid fuel boilers KV-R, KV-RV, KV-TS, KV-TSV, equipped with a furnace with a chain grate and scraper installation. The control panel contains the boiler control unit BUK10, the regulating unit BR10, registers (A100) devices, FGP-2M starters, sensors and devices power supplies, terminal blocks for external connections. Weight 225 kg. Power supply 220 V, 50 Hz. Power consumption 1,7 kVA. Dimensions 600 × 2200 × ґ600 mm.
Щит силовой ЩС1-КВР For the power supply of electric drives (except for the drives of the smoke exhaust fan and the fan) and the automation board SHCH-KVR hot-water solid fuel boilers KV-R, KV-RV, KV-TS, KV-TSV, equipped with a furnace with a chain grill and scraper. The switchboard houses automatic circuit breakers, magnetic starters, thermal and current relays, an input switch, terminal blocks for external connections. The number of reversible outputs with a voltage of 220/380 V — 3 pcs., Non-reversing outputs with a voltage of 220/380 V — 5 pcs., A voltage of 220 V — 1 pc. Input 220/380 V, 50 Hz, 50 kVA. Weight 170 kg. Dimensions 800 × 1800 × 400 mm.
Щит силовой ЩС2-КВР For power supply of non-reversible electric drives of the smoke exhaust fan and the fan of water-heating solid-fuel boilers KV-R, KV-RV, KV-TS, KV-TSV. In the switchboard are placed automatic switches, magnetic starters (or contactors), thermal and current relays, current transformers of cells and an input switch. Input 220/380 V, 50 Hz. The power of the drive of the smoke exhaust fan is up to 150 kVA, the fan — up to 40 kVA. Weight is not more than 190 kg. Dimensions 800 × 1800 × 600 mm.
Система автоматизации СА-КЕ For the automation of steam solid fuel boilers KE and DKVR, equipped with a furnace with a chain grate and scraper installation. The structure of the system includes the control panel SHCHA-KE, power boards SHS1-KE and SCHS2-KE, a full set of sensors and local devices for monitoring the process parameters of the boiler and actuators.
Щит автоматики ЩА-КЕ For the automation of steam solid fuel boilers KE and DKVR, equipped with a furnace with a chain grate and scraper installation. The control panel contains the boiler control unit BUK10, the regulating unit BR10, registers (A100) devices, FGP-2M starters, sensors and devices power supplies, terminal blocks for external connections. Weight 230 kg. Power supply 220 V, 50 Hz. Power consumption 1,7 kVA. Dimensions 600 × 2200 × 600 mm.
Щит силовой ЩС1-КЕ For the power supply of electric drives (except for the drives of the smoke exhaust and fan) and the automation board SHCH-KE of steam solid fuel boilers KE and DKVR equipped with a furnace with a chain grate and scraper installation (except boilers with a steam capacity of 2.5 t / h). The switchboard houses automatic circuit breakers, magnetic starters, thermal and current relays, an input switch, terminal blocks for external connections. The number of reversible outputs with a voltage of 220/380 V — 3 pcs., Non-reversing outputs with a voltage of 220/380 V — 5 pcs., A voltage of 220 V — 1 pc. Input 220/380 V, 50 Hz, 30 kVA. Weight 170 kg. Dimensions 800 × 1800 × 400 mm.
Щит силовой ЩС2-КЕ For power supply of non-reversible electric drives of the smoke exhaust fan and blower of steam solid-fuel boilers KE and DKVR. In the board are placed automatic switches, magnetic starters, relays, current transformer of cells and input switch. Input 220/380 V, 50 Hz. The power of the drive of the smoke exhaust fan is up to 60 kVA, the fan — up to 30 kVA. Weight is not more than 175 kg. Dimensions 800 × 1800 × 600 mm.
  • Block gas equipment BG for one boiler burner:

    • DN 100 мм (БГ3.00, БГ3.00-02, БГ6.00А, БГ8.00, БГ8.00-03)
    • DN 150 мм (БГ3.00-01, БГ3.00-03, БГ5.00, БГ5.00-02, БГ8.00-01, БГ8.00-05)
    • DN 200 мм (БГ5.00-01, БГ5.00-03, БГ8.00-02, БГ8.00-06)
  • Block of gas equipment BG on one double-flow burner of the boiler:

    • DN 200/150 мм (БГ11.00-01, БГ11.00-03)
    • DN 200/100/150 мм (БГ11.00-01, БГ11.00-02)
    • DN 150/100 мм (БГ13.00-01)
    • DN 250/200 мм (БГ14.00-01, БГ14.00-03)
    • DN 250/150/200 мм (БГ14.00, БГ14.00-02)
    • DN 200/150 мм (БГ16.00, БГ16.00-01)
  • A set of gas equipment for PTVM boilers:

    • ПТВМ 30
    • ПТВМ 100
    • ПТВМ 50, 60
    • ПТВМ 120
  • A set of gas equipment for boilers DKVR:

    • ДКВР 2,5; 4; 6,5; 10
    • ДКВР 20
  • A set of gas equipment and process control system:

    • to steam boilers of DE DE-4 type; 6.5; 10 DE-16 DE-25 shield registers with A-100 devices
    • to hot-water boilers of type KVGM KVGM-10 KVGM-20 KVGM-30 shield of registers with A-100 KVGM-50 KVGM-100 devices
    • to boilers of DKVR type DKVR 2.5; 4; 6.5; 10 DKAC of 20
  • Shut-off valves for the systems of azot-supply:

    • The block black oil (АМЦ 96.00)
    • Safety shut-off valve for fuel oil DN 25, P ram = 2.5 MPa (PZKM 25.00)
    • Safety overpressure valve of fuel oil DN 40, Prab = 4.0 MPa (PZKM 40.00)
    • Кран шаровой с электропривдом DN 25, Рраб=2,5 МПа (УК 39285)
  • Shutoff valves high-speed PZK (Rrab = 1,2 MPa):

    • DN 100 мм (1256.100.00, 1256.100А.00, 1256.100.00-01, 1256.100.00-02)
    • DN 150 мм (1256.150.00, 1256.150А.00, 1256.150.00-01, 1256.150.00-02)
    • DN 200 мм (1256.200.00, 1256.200А.00, 1256.200.00-01, 1256.200.00-02)
    • DN 250 мм (1256.250.00, 1256.250.00-02, 1256.250.00-01)
    • DN 300 мм (6727А.00)
    • DN 400 мм (6728А.00)
    • DN 500 мм (6729А.00)
    • DN 600 мм (6730А.00)
  • Shrouds throttle gas complete with counter flanges:

    • Throttle gas damper (Prab = 0,6 MPa, ΔР = 0,1 MPa, it is supplied both with the electric drive and without it):
      • DN 50 мм
      • DN 65 мм
      • DN 80 мм
      • DN 100 мм
      • DN 150 мм
      • DN 200 мм
    • Throttle gas damper (Prab = 1.2 MPa, ΔP = 0.2 MPa):
      • DN 150 мм
      • DN 200 мм
      • DN 300 мм
      • DN 400 мм
    • Throttle gas damper for fracturing (Рраб = 1,2 MPa, ΔР = 0,5 MPa, explosion-proof design, supplied with or without electric drive):
      • DN 50 мм
      • DN 65 мм
      • DN 80 мм
      • DN 100 мм
      • DN 150 мм
      • DN 200 мм
      • DN 250 мм
      • DN 300 мм
  • Electromagnetic valve (PN = 0,6 MPa):

    • «НЗ» DN 15 мм (1256.15.00)
    • «Н0» DN 15 мм (1256.15.00)
  • Valve for manometer (PN = 1,6 MPa):

    • Valve for manometer КМ1.00
  • Automatic burner control system:

    • The delivery package includes communication devices with the object, a microprocessor cabinet, peripheral devices and sensors.
MyCounter - счётчик и статистика